create access_profile
Description
DGS-3212SR Layer 3 Gigabit Switch
0xffffffff><hex 0x0-0xffffffff><hex 0x0-0xffffffff> | offset_32-47
<hex 0x0-0xffffffff><hex 0x0-0xffffffff><hex 0x0-0xffffffff><hex
0x0-0xffffffff> | offset_48-63 <hex 0x0-0xffffffff><hex 0x0-
0xffffffff><hex 0x0-0xffffffff><hex 0x0-0xffffffff> | offset_64-79
<hex 0x0-0xffffffff><hex 0x0-0xffffffff><hex 0x0-0xffffffff><hex
0x0-0xffffffff>}]{port[<portlist>|all]}[profile_id <value 1-255>]
The create access_profile command is used to create an access
profile on the switch and to define which parts of each incoming
frame's header the switch will examine. Masks can be entered
that will be combined with the values the switch finds in the
specified frame header fields. Specific values for the rules are
entered using the config access_profile command, below.
209