D-Link DGS-3212SR Command Line Interface Reference Manual page 164

Command
show authen server_host
config authen parameter
response_timeout
config authen parameter attempt
show authen parameter
enable admin
config admin local_enable
Each command is listed, in detail, in the following sections.
enable authen_policy
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the system access authentication policy:
DGS-3212SR:4#enable authen_policy
Command: enable authen_policy
Success.
DGS-3212SR:4#
disable authen_policy
Purpose
Syntax
Description
DGS-3212SR Layer 3 Gigabit Switch
Parameters
radius]
<int 1-255>
<int 1-255>
Used to enable system access authentication policy.
enable authen_policy
This command will enable an administrator-defined authentication
policy for users trying to access the switch. When enabled, the device
will check the method list and choose a technique for user
authentication upon login.
None.
Only administrator-level users can issue this command.
Used to disable system access authentication policy.
disable authen_policy
This command will disable the administrator-defined authentication
policy for users trying to access the switch. When disabled, the switch
will access the local user account database for username and
password verification. In addition, the switch will now accept the local
enable password as the authentication for normal users attempting to
access administrator level privileges.
152