D-Link DGS-3212SR Command Line Interface Reference Manual page 239

show sim
Syntax
show sim {[candidates {<candidate_id 1-32>} | members
{<member_id 1-32>} | group {commander_mac <macaddr>}
neighbor]}
Description This command will display the current information regarding the
SIM group on the switch, including the following:
SIM Version - Displays the current Single IP Management version
on the switch.
Firmware Version - Displays the current Firmware version on the
switch.
Device Name - Displays the user-defined device name on the
switch.
MAC Address - Displays the MAC Address of the switch.
Capabilities – Displays the type of switch, be it Layer 2 (L2) or
Layer 3 (L3).
Platform – Switch Description including name and model number.
SIM State –Displays the current Single IP Management State of the
switch, whether it be enabled or disabled.
Role State – Displays the current role the switch is taking, including
Commander, Member or Candidate. A stand-alone switch will
always have the candidate role.
Discovery Interval - Time in seconds the switch will send discovery
packets out over the network.
Hold time – Displays the time in seconds the switch will hold
discovery results before dropping it or utilizing it.
Parameters candidates <candidate_id 1-32> - Entering this parameter will
display information concerning candidates of the SIM group. To
view a specific candidate, include that candidate's id number, listed
from 1 to 32.
members <member_id 1-32> - Entering this parameter will display
information concerning members of the SIM group. To view a
specific member, include that member's id number, listed from 1 to
32.
group commander_mac <macaddr> - Entering this parameter will
display information concerning the SIM group of a commander
device, identified by its MAC address.
neighbor – Entering this parameter will display neighboring devices
of the switch. A SIM neighbor is defined as a switch that is
physically connected to the switch but is not part of the SIM group.
This screen will produce the following results:
DGS-3212SR Layer 3 Gigabit Switch
Port – Displays the physical port number of
commander switch where the uplink to the neighbor switch is
227
the