D-Link DGS-3212SR Command Line Interface Reference Manual page 132

To create a VLAN v1, tag 2:
DGS-3212SR:4#create vlan v1 tag 2
Command: create vlan v1 tag 2
Success.
DGS-3212SR:4#
delete vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To remove the vlan "v1":
DGS-3212SR:4#delete vlan v1
Command: delete vlan v1
Success.
DGS-3212SR:4#
config vlan
Purpose
Syntax
Description
Parameters
DGS-3212SR Layer 3 Gigabit Switch
Used to delete a previously configured VLAN on the switch.
delete vlan <vlan_name 32>
This command will delete a previously configured VLAN on the
switch.
<vlan_name 32> − The VLAN name of the VLAN you want to
delete.
Only administrator-level users can issue this command.
Used to add additional ports to a previously configured VLAN.
config vlan <vlan_name 32> { [ add [ tagged | untagged |
forbidden ] | delete ] <portlist> | advertisement [ enable |
disable]}
This command allows you to add ports to the port list of a
previously configured VLAN. You can specify the additional ports
as tagging, untagging, or forbidden. The default is to assign the
ports as untagging.
<vlan_name 32> − The name of the VLAN to be configured.
add − Used to add ports to the specified VLAN, in conjunction with
120