D-Link DGS-3212SR Command Line Interface Reference Manual page 176

show authen_enable
Restrictions
Example usage:
To display all method lists for promoting user level privileges to administrator level privileges.
DGS-3212SR:4#show authen_enable all
Command: show authen_enable all
Method List Name Priority Method Name Comment
----------------
Permit
default
Total Entries : 2
DGS-3212SR:4#
config authen application
Purpose
Syntax
Description
Parameters
DGS-3212SR Layer 3 Gigabit Switch
15 characters to define the given method list the user wishes to view.
all – Entering this parameter will display all the authentication login
methods currently configured on the switch.
None
-------- ---------------
1 tacacs+
2 tacacs
3 Darren
4 local
1 tacacs+
2 local
Used to configure various applications on the switch for
authentication using a previously configured method list.
config authen application [console | telnet | ssh | http | all]
[login | enable] [default | method_list_name <string 15>]
This command is used to configure switch configuration applications
(console, telnet, ssh, web) for login at the user level and at the
administration level (authen_enable) utilizing a previously configured
method list.
application – Choose the application to configure. The user may
choose one of the following four applications to configure.
console – Choose this parameter to configure the
command line interface login method.
telnet – Choose this parameter to configure the telnet login
------------------
Built-in Group
Built-in Group
User-defined Group
Keyword
Built-in Group
Keyword
164