Staple Jams in the Inner Finisher
1
Check whether paper is jammed in output tray of the finisher.
●
If paper is jammed, gently pull it out in the direction of the arrow.
●
When you are using the Staple mode, do not remove the current stack of printouts from the output tray
before it is stapled. After the paper jam clearing operation is finished, the following printouts will add to
the current stack.
2
Open the front cover of the finisher.
3
Pull out the staple cartridge.
●
Pull down the green knob on the staple cartridge to disengage the lock, and lift up the cartridge slightly while
pulling it straight out.
Troubleshooting
697
19YU-0C8