Table of Contents
Advertisement
Setting
<Entry Tone>
<Invalid Entry Tone>
<Restock Supplies Tone>
<Warning Tone>
<Job Done Tone>
<Energy Saver Alert>
<Original in Feeder Detection Tone> Sound produced when an original is loaded
4
Use the slider to set volume, select <Apply>.
●
To mute the sound, move the cursor all the way to the left.
End sound only for error
In <Sound Only When Error Occurs>, select <On>, and select <Apply>.
Basic Operations
Description
Confirmation sound each time a key on the
operation panel or button on the display is
pressed
Sound produced when an invalid key
operation is performed, such as when you
enter a number outside the valid setting
range
Sound produced when a toner cartridge is
almost empty
Sound produced when a paper jam or other
error occurs
Sound produced when an operation such
as copying or scanning is complete
Sound produced when the machine enters
or exits sleep mode
in the feeder
176
Procedure
Select <On> (produce a tone) or
<Off> (not produce a tone).
Advertisement
Table of Contents
