Table of Contents
Advertisement
●
Make sure that the original stack does not exceed the load limit lines (
exceed the limit, they may not be scanned or may cause a paper jam.
●
Always smooth out any folds in your originals before placing them into the feeder. If the original is folded,
an error screen may be displayed because the size of originals cannot be detected correctly.
●
Thin originals may become creased, if used in a high temperature or high humidity environment.
●
When copying 2-sided original, place the original so that the top and the bottom are properly positioned,
as shown in the illustration below.
●
You can place different sized originals and scan them all at once.
Copying Different Size Originals Together (Different Size Originals)(P. 211)
Scanning Different Size Originals Together (Different Size Originals)(P. 310)
4
Align the slide guides against the edges of the original.
●
Move the slide guides inward until they are aligned securely against the edges of the original.
➠
Originals are ready for scanning.
Align the slide guides securely against the edges of the original
●
Slide guides that are too loose or too tight can cause misfeeds or paper jam.
Basic Operations
131
). If you place originals that
Advertisement
Table of Contents
