Table of Contents
Advertisement
Setting a Remote UI PIN
You can set a PIN for access to the Remote UI. All users use a common PIN.
●
When Department ID Management is enabled, setting here is not required.
Management(P. 364)
●
For more information about the basic operations to be performed when setting the machine from the
Remote UI, see
Setting Up Menu Options from Remote UI(P. 434) .
1
Start the Remote UI and log in to System Manager Mode.
UI(P. 427)
2
Click [Settings/Registration] on the Portal page.
3
Select [License/Other]
4
Click [Edit].
5
Select the [Use Remote UI Access PIN] check box and set the PIN.
[Use Remote UI Access PIN]
If you select the check box, you must enter a PIN to access the Remote UI.
[Set/Change PIN]
To set or change a PIN, select the check box and enter the same number both in the [PIN] and [Confirm] text
boxes.
6
Click [OK].
Managing the Machine
[Remote UI Settings].
370
Setting the Department ID
Starting Remote
Remote UI Screen(P. 428)
19YU-06Y
Advertisement
Table of Contents
