Table of Contents
Advertisement
The USB memory is restricted.
The function that stores a scanned original to a USB memory device is disabled.
●
Set <Use Scan Function> to <On>.
Restricting the Scan to USB Function(P. 420)
The WEP key is not set correctly. Check the WEP settings.
The network key (the WEP key) of a wireless router to be connected is not set to the machine correctly.
●
Check the network key (the WEP key) of the wireless router, and set it to the machine again.
Checking the SSID and Network Key(P. 28)
Setting Up Connection by Selecting a Wireless Router(P. 22)
Setting Up Connection by Specifying Detailed Settings(P. 25)
The authentication method of the machine is set to <Shared Key>, but that of the wireless router is set to
"Open System."
●
Connect again by selecting a wireless router or by manually changing the WEP authentication method to
<Open System>.
Setting Up Connection by Selecting a Wireless Router(P. 22)
Setting Up Connection by Specifying Detailed Settings(P. 25)
●
Change the WEP authentication method to "Shared Key" at the wireless router, and connect again. For
more information about how to change, see the instruction manuals for your networking devices or
contact your manufacturer.
Toner low. (Rplct. not yet needed.)
Toner is running out, and the machine will soon not be able to print.
●
Prepare a new toner cartridge before the toner runs out.
Use Remote UI to set the information necessary for authentication.
The IEEE 802.1X settings are incorrect.
●
Check whether [Login Name] is set correctly.
●
Check whether the [Use TLS], [Use TTLS], or [Use PEAP] check box is selected.
●
If using TLS, check whether a "key and certificate" is registered.
●
If using TTLS or PEAP, check whether a user name and password are set correctly.
Configuring IEEE 802.1X Authentication Settings(P. 406)
Troubleshooting
667
Advertisement
Table of Contents
