Table of Contents
Advertisement
Adjusting Gradation
Gradation refers to the dark to light continuum of shades of a color. The more shades in the gradations of colors that
are printed, the more natural printouts seem. If color reproducibility becomes poor and the density and brightness of
printouts differs markedly from the originals, perform the appropriate auto adjustment. There are two options of
gradation adjustment: "Full Adjust" for accurate adjustment, "Quick Adjust" for simple adjustment.
Full Adjust(P. 614)
Quick Adjust(P. 617)
●
Adjustments may not be performed effectively if there is not sufficient toner cartridge remaining. Check the
amount of toner remaining in each cartridge. If the amount of toner is low in any of the toner cartridges, it is
recommended that you replace the toner cartridge(s).
Consumables(P. 611)
Full Adjust
This adjustment optimizes reproducibility for color printing. When the machine performs full adjustment, it obtains
information to optimize color reproducibility. The machine maintains this information until the next time you perform
full adjustment. To make a full adjustment, repeat the operation, "print out the adjustment image and scan it,"
multiple times. Note that you cannot perform this adjustment while performing some functions, including, scanning,
and printing.
If the printed color tones are different from the color tones of the print data
Depending on the paper to use for printing and the print settings, perform correction as follows.
●
To print on plain paper, perform correction with <Standard (Plain)>
●
To print on heavy paper, first perform correction with <Standard (Plain)>
*2
(Heavy)>
.
●
To print on plain paper using the Superfine function, first perform correction with <Standard (Plain)>
then with <For Printer 1200 dpi>
●
To print on heavy paper using the Superfine function, first perform correction with <Standard (Plain)>
with <Standard (Heavy)>
*1
Perform correction using plain paper.
*2
Perform correction using heavy paper.
1
Select <Menu> in the Home screen.
Maintenance
*1
.
*2
, and finally with<For Printer 1200 dpi>
Checking the Remaining Amount of
*1
.
*2
.
Home Screen(P. 116)
614
19YU-0A2
*1
and then with <Standard
*1
*1
, then
and
Advertisement
Table of Contents
