Table of Contents
Advertisement
A scanned original could not be stored to a USB memory device due to insufficient memory space.
●
Delete unnecessary data to free space in the USB memory device, or connect a different USB memory
device.
Connecting a USB Memory Device(P. 99)
The memory is full. Enter the original type settings again.
An original could not be scanned because memory became full during copying.
●
Set <Original Type> to <Text/Photo/Map (Speed)>, and copy.
Selecting the Type of Original for Copying(P. 203)
The memory is full. Scanning will be canceled. Do you want to print?
An original could not be scanned due to insufficient memory space.
●
Select whether to print the pages that were scanned or cancel the job.
●
Copy the original in two or more parts.
Not all of the pages could be scanned during sorting and copying.
●
Select whether to print the pages that were scanned or cancel the job.
●
If this is a copy job, either copy the original in two or more parts or change the <Original Type> setting to
<Text/Photo/Map> and then copy the original.
Selecting the Type of Original for Copying(P. 203)
The number of entered characters is incorrect or invalid characters are used.
The network key (the WPA/WPA2-PSK or WEP key) of a wireless router is not entered correctly.
●
Check the network key (the WPA/WPA2-PSK or WEP key) of the wireless router, and set it to the machine
again. For more information about how to check the network key, see the instruction manuals for your
networking devices or contact your manufacturer.
Checking the SSID and Network Key(P. 28)
Setting Up Connection by Selecting a Wireless Router(P. 22)
Setting Up Connection by Specifying Detailed Settings(P. 25)
The paper size/type combination is invalid.
The paper settings in the multi-purpose tray differ from the paper that is loaded.
●
Check the paper settings on the paper information in <Paper Settings>. If the paper settings are incorrect,
match them with the paper size and type of the paper that is loaded. Paper settings can be specified for all
the paper sizes and types set in the multi-purpose tray in <Paper Settings>.
Specifying Paper Size and Type in the Multi-Purpose Tray(P. 156)
Troubleshooting
666
Advertisement
Table of Contents
