Table of Contents
Advertisement
4
5
6
7
8
9
Step 5
Setting the Wireless LAN
Configure the settings to connect to the network using the wireless LAN.
1
2
3
➠
When the Setup Guide is complete, the Home screen appears.
Setting Up
➠
An adjustment image is printed.
Open the feeder or the platen cover after the screen displayed during printing is
closed.
Place the printed adjustment image on the platen glass.
●
Place the adjustment image with the print side facing down while checking that
the black stripe is placed on the back side of the machine.
Gently close the feeder or the platen cover.
Select <Start Scanning>.
➠
The adjustment image is scanned, and the next adjustment image is printed.
After scanning and printing are finished, open the feeder or the platen cover and
remove the adjustment image.
Repeat steps 5 to 8.
●
To complete the adjustment, print the adjustment image three times, and scan
it each time it is printed.
Select <Yes>.
●
If you select <No>, wireless LAN is not set, and the Setup Guide is complete, the
Home screen appears.
Select <OK>.
Select the setting method.
●
For more information about the wireless LAN settings, see
Wireless LAN(P. 16) .
9
Connecting to a
Advertisement
Table of Contents
