●
Fan the paper stack well, and tap it on a flat surface to align the edges.
●
Fan all four sides of the paper stack well.
●
Make sure that there is enough air between each sheet of paper.
●
Especially when you use transparencies, completely separate them from each other before loading them.
4
Insert the paper into the multi-purpose tray until the paper stops.
●
Load the paper with the print side face down.
➠
The screen for specifying the paper size and type is displayed when the paper is fully inserted.
Do not exceed the load limit line when loading paper
●
Make sure that the paper stack does not exceed the load limit line (
cause paper jams.
●
If you use envelopes or paper with a logo mark, pay attention to the orientation when loading them in the
paper source.
Loading Envelopes(P. 141)
Loading Preprinted Paper(P. 148)
●
Feed coated paper one sheet at a time.
5
Check the paper size and paper type, and press <Apply>.
Basic Operations
139
). Loading too much paper can