Table of Contents
Advertisement
Is the document feed scanning area dirty?
●
Clean the document feed scanning area.
Cleaning the Feeder(P. 587)
Bleedthrough occurs.
Is the density of backgrounds set appropriately?
●
If bleed-through is observed with the print result, adjusting the density of background can improve the
problem, giving a fine print.
Basic Copy Operations(P. 193)
Basic Operations for Sending Faxes(P. 221)
Adjusting Gradation(P. 614)
Images are not printed on the intended side of the paper.
Is the orientation of the loaded paper correct?
●
Check the orientation and side of the paper that is facing up. Load the paper again if it is incorrectly
orientated.
Loading Paper(P. 133)
Images are not printed in the intended size.
Do the original size and size of the paper that is loaded match?
●
Replace the paper that is loaded with paper of the size you want to print on.
●
Match [Output Size] in the printer driver with the size of paper to print on.
Troubleshooting
646
Advertisement
Table of Contents
