Table of Contents
Advertisement
Paper on which reports or lists can be printed is not loaded.
●
Reports or lists can be printed on plain/recycled/color paper of A4 or Letter size. Load appropriate paper,
and make settings for paper size and paper type.
Loading Paper(P. 133)
Specifying Paper Size and Type(P. 152)
Paper on which received documents can be printed is not loaded.
●
Load appropriate paper for printing the received document, and make settings for paper size and paper
type.
Loading Paper(P. 133)
Specifying Paper Size and Type(P. 152)
Available Paper(P. 718)
●
If you print received documents on paper other than A4 or Letter size, some portions of the image may be
missing or the image may be divided and printed onto several sheets.
Load staples into the stapler unit.
The staple cartridge in the stapler unit (optional) has run out of staples.
●
Replace the staple cartridge.
Replenishing the Staples (Optional)(P. 604)
Memory Full (Secure Print)
Memory became full of secured documents that were not printed.
●
Print the secured documents that are stored in memory.
Printing via Secure Print(P. 269)
Memory Full (Skip Error)
The memory became full of print data that could not be printed due to errors.
●
Cancel printing of documents to which an error has occurred, or print the documents by selecting <Skip
Error> on the screen for checking the printing status.
Canceling Prints(P. 263)
Memory Media Print is restricted.
The function that prints files in a USB memory device is disabled.
●
Set <Use Print Function> in <Memory Media Settings> to <On>.
Restricting the USB Print Function(P. 420)
Troubleshooting
662
Advertisement
Table of Contents
