Table of Contents
Advertisement
*
<Drawer 4>
<Off>
<On>
<Menu>
<Adjustment/Maintenance>
Processing>
<On> in the paper source to be set
<Adj. Toner Vol. for Color Print.>
You can prevent excessive toner from being fixed onto paper to reduce print failure such as poor toner fixing or
bleed-through.
Troubleshooting(P. 636)
<Off>
<Level 1>
<Level 2>
<Fill Area Image Adj. Mode>
When printing an original with a lot of fill, correct the unevenness of the filled part.
Problems(P. 637)
<Mode 1>
<Mode 2>
<Mode 3>
Setting Menu List
<Special Paper Processing>
<Apply>
480
<Adjust Image Quality>
<Manual Back Side Print (2-Sided Only)>
<Yes>
<Special
Select
Common
Advertisement
Table of Contents
