Loading Envelopes in the Multi-Purpose Tray
Load the envelopes as shown in the following illustrations, with the front side of the envelopes (the side without the
glued areas) face down (recommended).
Yougatanaga 3
Close the flaps, and load the envelopes so that their flaps are on the far side.
Nagagata 3, Kakugata 2
Load the envelopes so that their flaps are on the right side.
Monarch, COM10 No. 10, DL, ISO-C5
Close the flaps, and load the envelopes so that their flaps are on the left side.
●
If the envelopes are not fed properly even if they have been prepared according to the procedures, load the
envelopes individually in the multi-purpose tray instead of loading several sheets together.
●
Do not print on the reverse side of the envelopes (the side with the glued areas).
●
When you print on envelopes, remove them from the output tray 10 at a time.
Basic Operations
146