Table of Contents
Advertisement
Scanning 2-Sided Originals
●
The machine cannot scan both sides of originals automatically when the originals are placed on the platen
glass or when the machine is set to Manual Sending.
Select <2-Sided Original> in the <TX/RX Settings> tab
<Book Type>
Select for originals whose images on the front and back sides face the same direction.
<Calendar Type>
Select for originals whose images on the front and back sides face in opposite directions.
6
Select <Start>.
●
If the <Confirm Destination> screen is displayed, check whether the destination is correct, and then select
<Start Scanning>.
➠
Scanning of the original starts.
●
If you want to cancel, select <Cancel>
When placing originals in the feeder in step 1
When scanning is complete, the faxes are sent.
When placing originals on the platen glass in step 1
When scanning is complete, follow the procedures below.
1
Select the original size.
●
When there is only one page to be scanned, proceed to step 3.
2
Place the next original on the platen glass, and select <Scan Next>.
●
Repeat this step until you finish scanning all of the pages.
Faxing
The machine can automatically scan the front and back sides of originals in the
feeder.
<Yes>.
227
Select <Book Type> or <Calendar Type>
Canceling Sending Faxes(P. 229)
Advertisement
Table of Contents
