Replacing The Staple Cartridge (Inner Finisher-F1) - Canon imageRUNNER ADVANCE C2225 Basic Operation Gude

4
4
Push the saddle stitcher unit back into its original position .
When pushing the saddle stitcher unit back into its original position, be careful not to get your
fingers caught, as this may result in personal injury .
5
5
Close the front cover of the finisher .
When closing the front cover of the finisher, be careful not to get your fingers caught, as this
may result in personal injury .
When you have replaced the staple case, be sure to manually reposition the staples in the saddle stitcher
unit. (See e-Manual > Settings/Registration.)

Replacing the Staple Cartridge (Inner Finisher-F1)

This section describes the procedure for replacing the staple cartridge in the Inner Finisher-F1.
1
1
Pull out the staple case from the finisher .
82
2
2
1
1.■ Pull■the■stapler■unit■towards■
you,■and■then■push■it■down■
into■its■original■position.
2.■ Grip■the■handle■of■the■
saddle■stitcher■unit,■and■
return■it■to■its■original■
position.
1.■ Open■the■front■cover■of■the■
finisher.
2.■ Lift■and■pull■out■the■staple■
case■from■the■stapler■unit,■
holding■it■by■the■green■tab.