Table of Contents
Advertisement
<Send>
All the settings related to sending faxes or scanned originals are listed with descriptions. Default settings are marked
with a dagger ( ).
*
Asterisks (
)
●
Settings marked with "
setting items.
●
Settings marked with "
or region.
●
Settings marked with "
<Common Settings>(P. 539)
<Scan and Send Settings>(P. 540)
<Fax Settings>(P. 545)
<Common Settings>
Specify the confirmation method used to restrict destinations at the time of sending faxes, e-mails, or I-Faxes or to
prevent transmission errors.
<Restrict New Destinations>
Select whether to limit the fax numbers and e-mail/I-Fax addresses that can be specified as destinations to
those already registered in the Address Book.
<Off>
<On>
<Restrict Resending from Log>
Select whether to prevent a destination from being selected from the sent job logs.
Previously Used Destinations(P. 415)
<Off>
<On>
<Confirm When Coded Dial TX>
Select whether to display the details of an entered coded dial number when it is selected as a destination.
Displaying Destinations in Address Book(P. 415)
<Off>
<On>
<Confirm Dest. Before Sending>
Specify whether to display the destination confirmation screen when sending faxes, e-mails, or I-Faxes. If <Only
for Sequential Broadcast> is selected, the confirmation screen is displayed only when multiple destinations are
specified.
Checking Destinations when Sending Data(P. 416)
<Off>
Setting Menu List
*1
" may not be displayed depending on the model you are using, options, or other
*2
" may be unavailable or vary or have different defaults depending on your country
*3
" cannot be imported or exported.
Restricting New Destinations that Can Be Specified(P. 415)
539
19YU-08Y
Disabling Use of
Advertisement
Table of Contents
