Table of Contents
Advertisement
<Off>
Prints no annotations.
<Auto>
Prints only those annotations that are specified to be printed in the PDF file.
<Password to Open Document>
You can print password protected PDF files by entering the password required to open them. Enter the
password, and select <Apply>.
<Other Settings>
<Halftones>
You can select the printing method used to reproduce halftones (the intermediate range between the lighter
and darker areas of an image) for optimal image quality. You can make this setting for each of the types of
image contained in one document. See
<Pure Black Text>
You can print black text of which color information is "R=G=B=0%," "C=M=Y=100%," or "C=M=Y=0% / K=100%,"
using only the K (black) toner. See
<Black Overprint>
Specify the printing method used when black text overlaps a colored background or figure. See
Overprint>(P. 527) for the description of the setting.
<RGB Source Profile>
Select the source profile for color matching to print RGB data, according to the monitor you are using. See
<RGB Source Profile>(P. 527) for the description of the setting.
<CMYK Simulation Profile>
This setting allows you to specify the simulation target to print the CMYK (Cyan Magenta Yellow Black) data.
The machine converts CMYK data into a device dependent CMYK color model based on this simulation. See
<CMYK Simulation Profile>(P. 528) for the description of the setting.
<Use Grayscale Profile>
Specify whether to convert gray data to CMYK (cyan, magenta, yellow, and black) data using the grayscale
profile of the machine. See
<Output Profile>
Select the appropriate profile for print data. This option can be specified for each image type in one
document. See
<Output Profile>(P. 529) for the description of the setting.
<Matching Method>
Select the element to be prioritized when making color adjustment in <RGB Source Profile>. See
<Matching Method>(P. 530) for the description of the setting.
<Composite Overprint>
Specify whether to overprint CMYK data, with overprint specified, as composite output. See
Overprint>(P. 532) for the description of the setting.
<Grayscale Conversion>
Specify the way of printing color data in black and white. See
description of the setting.
<Print Quality>
<Density>
Adjust the toner density to be used for printing. See
<Toner Save>
Printing
<Halftones>(P. 531) for the description of the setting.
<Pure Black Text>(P. 527) for the description of the setting.
<Use Grayscale Profile>(P. 529) for the description of the setting.
278
<Grayscale Conversion>(P. 533) for the
<Density>(P. 498) for the description of the setting.
<Black
<Composite
Advertisement
Table of Contents
