Checking Status and Log for Scanned Originals
You can check the status and log for scanned originals sent directly from the machine.
●
When <Display Job Log> is set to <Off>, you cannot check the logs for sent documents.
Log>(P. 572)
1
Select <Status Monitor>.
2
Select <TX Job>.
3
Check the statuses and logs for sent documents.
To check the statuses for sent documents
1
Select the document whose status you want to check in the <TX Job Status> tab.
➠
Displays detailed information about the document.
●
If you specified multiple destinations, the number of specified destinations is displayed on the screen.
To check the details of specified multiple destinations, select <Destination>.
To check the logs for sent documents
1
Select the document whose log you want to check in the <TX Job Log> tab.
●
<OK> is displayed when a document was sent successfully, and <Error> is displayed when a document
failed to be sent because it was canceled or there was some error.
➠
Displays detailed information about the document.
When a three-digit number is shown in the case of <Error>
Scanning
303
19YU-05L
<Display Job