While originals are being scanned
●
Do not add or remove originals.
When scanning is complete
●
Remove the scanned originals from the original output tray to prevent paper jams. To prevent originals
from being left in the original output tray, the original output indicator lights while the originals are being
output, and blinks for a while after all the originals have been output.
When placing thin paper originals
●
Make sure that you do not push too hard when placing the original. The original may not be fed correctly,
or may cause a paper jam.
When repeatedly scanning the same original
●
It is recommended that you do not repeatedly scan the same original more than five times (this varies
depending on paper quality). The original may fold or become wrinkled, or become difficult to send.
Basic Operations
132