Table of Contents
Advertisement
●
To send faxes to multiple destinations at a time (sequential broadcast), repeat the appropriate steps to
enter all destinations.
●
You can also recall previously used destinations.
(Recall Settings)(P. 234)
To delete destinations
If you specified multiple destinations, you can delete destinations as necessary.
1
Select <Confirm Destination>.
2
Select the check box for the destination to be deleted, and select <Remove from Dest.>.
●
If you select Group Dial, select <Details>
the group.
3
Select <Yes>.
5
Specify the scanning settings as necessary.
Adjusting Image Quality
Scanning 2-Sided Originals
Adjusting Image Quality
◼
Selecting Resolution
Select <Resolution> in the <TX/RX Settings> tab
Faxing
You can select the resolution suitable for your original type. The higher the
resolution is, the clearer the image becomes, but the longer it takes to send.
Selecting Resolution(P. 225)
You can adjust the density of the fax if the text or images in an original are too light
or dark.
Adjusting Density(P. 226)
You can adjust the sharpness of the image. Increase the sharpness to sharpen
blurred text and lines, or decrease the sharpness to improve the appearance of
magazine photos.
Adjusting Sharpness(P. 226)
225
Recalling Previously Used Settings for Sending
<Destination>; you can view the destinations registered in
Select the resolution
Advertisement
Table of Contents
