3
Gently close the feeder or the platen cover.
➠
The original is ready for scanning.
●
When scanning is complete, remove the original from the platen glass.
Placing Originals in the Feeder
1
Spread the slide guides apart.
●
Move the slide guides outward until they are slightly farther apart than the actual width of the original.
2
Fan the original stack and align the edges.
●
Fan the original stack in small batches, and align the edges by lightly tapping the stack on a flat surface a few
times.
3
Place the originals face up in the feeder.
Basic Operations
130