Table of Contents
Advertisement
Automatically Selecting an Appropriate Paper Source
for Each Function
Enable or disable the automatic paper source selection feature for each paper source. If this feature is set to <On>, the
machine automatically selects a paper source that is loaded with paper of the appropriate size for each print job. Also,
when the paper in the selected paper source runs out, this feature enables continuous printing by switching from that
paper source to another that is loaded with the same paper size.
1
Select <Menu> in the Home screen.
2
Select <Function Settings>
3
Select <Paper Source Auto Selection>.
4
Select the target function.
●
When the target function is report/list printing or memory media print, select <Other>.
5
For each paper source to which you want to apply the automatic paper source
selection feature, select <On>.
●
<Drawer 3> and <Drawer 4> are displayed only when the optional cassette feeding unit is installed.
●
Always specify <On> for at least one paper drawer. If you specify <Off> for all the paper drawers, then you
cannot finish the setting procedure.
6
Select <Apply>.
Basic Operations
Home Screen(P. 116)
<Common>
<Paper Feed Settings>.
164
19YU-0HJ
Advertisement
Table of Contents
