Table of Contents
Advertisement
<Menu>
<Function Settings>
Smoothing>
●
[Gradation Smoothing] in the printer driver applies only to graphics data. The setting configured here
applies to smoothing processing for image data.
<Layout>
Specify the page layout settings such as binding position and margin values.
<Binding Location>
If you are binding the printouts with a binding tool such as a stapler, use this item to specify whether to bind
on the long or short edge. Specify the setting of this item in combination with <Gutter>, which specifies the
binding margin to apply to the binding position.
<Long Edge>
<Short Edge>
<Menu>
<Function Settings>
Location>
Select <Long Edge> or <Short Edge>
<Long Edge>
Specify this to bind on the long edge of paper.
<Short Edge>
Specify this to bind on the short edge of paper.
<Gutter>
Shift the print position to adjust the binding margin to apply to the binding edge specified by <Binding
Location>. The value "00.0" exerts no effect on the binding margin.
-50.0 to 00.0
to +50.0 (mm)
Setting Menu List
<Printer>
<Apply to Images>
Select <Off> or <On>
<Printer>
504
<Printer Settings>
<Print Quality>
<Printer Settings>
<Layout>
<Gradation
<Binding
Advertisement
Table of Contents
