Register Unit Telephone Number - Canon imageRUNNER C3025i User Manual

<Redial Interval>
Specifies the interval between redials. Enter a number for the interval, and select <Apply>.
<Redial When Error Occurs>
When set to <On>, specifies to redial when a transmission error occurs.
<Check Dial Tone Before Sending>
Select whether to check the dial tone before a fax number is dialed.
<Off>
<On>
<Menu> <Function Settings>
Sending> <On>
<Set Line>
Specify a fax number, unit name, and line type.
<Register Unit Telephone Number>
Register the fax number for the machine.
<Register Unit Name>
Register the name of a company or person (
registered name is sent as sender information to the destination (
*2
<Select Line Type>
Select the telephone line type used for fax transmission.
<Select Line Type (Manual)>
<Pulse>
<Tone>
<Rotate Img to Send(Long Edge)>
Select whether to rotate the original that is set sideways by 90 degrees and send automatically.
<Off>
<On>
<Menu> <Function Settings>
Edge)> Select <Off> or <On>
<TX Start Speed>
If it takes time to start sending originals, such as when there is a poor connection, you can adjust the
transmission start speed downward incrementally.
<33600 bps>
Setting Menu List
*2
<Send> <Fax Settings>
Registering the Fax Number and Unit Name(P. 79)
Registering the Fax Number and Unit Name(P. 79) ). The
Connecting the Telephone Line(P. 81)
<Send> <Fax Settings>
548
<Check Dial Tone Before
<TX Terminal ID>(P. 550) ).
<Rotate Img to Send(Long