Adding Cameras For Nvr Supporting Poe Function; Figure 2-29 List Of Connected Cameras - NEC NRS Expanded Series Configuration Manual

NVR Configuration Guide (Advanced) for NRS Expanded Series
Example:
If you have 8ch NVR with eight POE interfaces and you want to connect six
network cameras via PoE interfaces and two online cameras, you must disable
two of the PoE interfaces in the Edit IP Camera menu.
5.4.1

Adding Cameras for NVR Supporting PoE Function

Before you start, connect the network cameras via the PoE interfaces.
1. Enter the Camera Management screen:
Menu > Camera > Camera

Figure 2-29 List of Connected Cameras

NOTE
2. Click the
list.
Plug-and-Play: The camera is connected to the PoE interface. In

this case, the parameters of the camera cannot be edited. The IP
address of the camera can only be edited in the Network
Configuration interface, refer to
General Settings on page 16-2
Cameras connecting to the PoE interface cannot be deleted
from this menu.
(Edit) icon and select Adding Method in the dropdown
Chapter 16, Section 2 Configuring
for detailed information.
ISSUE 1.0
2-21