Table 1-2 Descriptions Of Front Panel 2 Buttons - NEC NRS Expanded Series Configuration Manual

No.
1
2
4
5
6
NVR Configuration Guide (Advanced) for NRS Expanded Series

Table 1-2 Descriptions of Front Panel 2 Buttons

Name
Power ON/OFF Power on/off switch.
Connect to USB mouse or USB flash memory.
USB Interface
Power indicator lights in green when DVR is powered up.
POWER
Ready indicator is normally green, indicating that the DVR is functioning
READY
properly.
Indicator turns red when the SHIFT button is used.
STATUS
Indicator does not light when the DVR is controlled by a keyboard.
ALARM Alarm indicator turns red when a sensor alarm is detected.
HDD HDD indicator blinks in red when data is being read from or written to HDD.
TX/RX indicator blinks in green when network connection is functioning properly.
TX/RX
Slot for DVD-ROM.
DVD-ROM
The DIRECTION buttons are used to navigate between different fields and items
in menus.
In Playback mode, the Up and Down button is used to speed up and slow down
recorded video.
Direction
In All-day Playback mode, the Left/Right button can be used to select the
recorded video of next/previous day; in Playback by Normal Video Search, the
Left/Right button can be used to select the next/previous recorded file.
In Live View mode, the directional buttons can be used to cycle through
channels. In PTZ control mode, it can control the movement of the PTZ camera.
Confirm selection in any of the menu modes. It can also be used to tick
checkbox fields.
In Playback mode, it can be used to play or pause the video.
Enter In Single-frame Playback mode, pressing the ENTER button advances the video
by a single frame.
In Auto-switch mode, it can be used to stop/start auto switch.
In Auto-switch mode, it can be used to stop/start auto switch.
Function Description
ISSUE 1.0
1-5