Table of Contents
Advertisement
S
17 PIR A
ECTION
The PIR (Passive Infrared) alarm is triggered when an intruder moves within the
detector's field of view. The heat energy dissipated by a person or any other warm-
blooded creature such as dogs, cats, etc. can be detected.
1.
2.
3.
4.
5.
6.
NVR Configuration Guide (Advanced) for NRS Expanded Series
LARM
Access the VCA settings screen:
Menu -> Camera -> VCA
Select the camera to configure the VCA.
Check the Save VCA Picture checkbox to save the captured pictures of the VCA
detection.
Select VCA detection type: PIR Alarm.
Click
to configure the trigger channel, arming schedule and linkage actions for
the PIR alarm.
Click the Rule Settings button to set the audio exception rules. Refer to the
3 Face Detection on page 9-2
Click Apply to activate the settings.
for instructions.
ISSUE 1.0
Section
9-13
Advertisement
Table of Contents
Troubleshooting
