Configuring The Customized Protocols; Figure 2-27 Protocol Management Screen - NEC NRS Expanded Series Configuration Manual

NVR Configuration Guide (Advanced) for NRS Expanded Series
5.3.2

Configuring the Customized Protocols

To connect the network cameras, which are not configured with the
standard protocols, you can configure the customized protocols for them.
1. From Figure 2-22 Add IP Camera (Custom) Screen
Protocol button to enter the Protocol Management screen.

Figure 2-27 Protocol Management Screen

There are 16 customized protocols provided in the system. You can
edit the Protocol Name and choose whether to enable the
sub-stream.
2. Choose the protocol type of transmission and select the transfer
protocols.
NOTE
The format of the URL is:
[Type]://[IP Address of the network camera]:[Port]/[Path]
Example:
rtsp://192.168.1.55:554/ch1/main/av_stream.
Protocol Name: Edit the name for the custom protocol.

Enable Substream: If the network camera does not support

sub-stream or sub-stream is not needed, leave the checkbox empty.
Type: The network camera adopting custom protocol must support

receiving stream through standard RTSP.
Before customizing the protocol for the network camera,
you have to contact the manufacturer of the network
camera to consult the URL (Uniform Resource Locator)
for getting main stream and sub-stream.
ISSUE 1.0
screen, click the
2-19