Configuring Privacy Mask; Figure 14-2 Privacy Mask Settings Screen - NEC NRS Expanded Series Configuration Manual

ISSUE 1.0
S 2 C
ECTION ONFIGURING
You are allowed to configure the four-sided privacy mask zones that cannot be
viewed by the operator. The privacy mask can prevent certain surveillance areas
from being viewed or recorded.
1.
2.
3.
4.
5.
14-2
P
RIVACY
Open the Privacy Mask Settings screen:
Menu -> Camera -> Privacy Mask

Figure 14-2 Privacy Mask Settings Screen

Select the camera to set privacy mask.
Check the Enable Privacy Mask checkbox to enable this feature.
Use the mouse to draw a zone on the window. The zones are marked with different
frame colors.
A maximum of four privacy mask zones can be configured. The size of each
area can also be adjusted.
NOTE
The configured privacy mask zones on the window can be cleared by clicking the
corresponding Clear Zone 1-4 icons on the right side of the window or click Clear
All to clear all zones.
M
ASK
Camera Settings