Chapter 1 Introduction; Table 1-1 Descriptions Of Front Panel 1 Buttons - NEC NRS Expanded Series Configuration Manual

Introduction
S 1 F
ECTION RONT
1.1 Front Panel 1
No.
1
3
3
4
NVR Configuration Guide (Advanced) for NRS Expanded Series
P
ANEL
Figure 1-1 Front Panel 1
of Front Panel 1 Buttons
Figure 1-1 Front Panel 1

Table 1-1 Descriptions of Front Panel 1 Buttons

Name
Power ON/OFF
ALARM
READY
Status
STATUS
Indicators
HDD
MODEM
TX/RX
Status
Indicator GUARD
( )
continued
DVD/R/W
shows the front panel layout and
describes the control buttons.
Function Description
Power on/off switch.
Turns red when a sensor alarm is detected.
Ready LED is normally blue, indicating that the device is
functioning properly.
Turns red when controlled by a keyboard.
Flashes red when data is being read from or written to HDD.
Reserved for future usage.
Flashes blue when network connection is functioning properly.
Guard LED turns blue when the device is in armed status; at this
time, an alarm is enabled when an event is detected.
The LED turns off when the device is unarmed. The arm/disarm
status can be changed by pressing and holding on the ESC
button for more than three seconds in live view mode.
Slot for DVD-R/W.
Chapter 1
Table 1-1 Descriptions
1-1