One-Touch Park; Figure 4-12 Ptz Panel - One-Touch - NEC NRS Expanded Series Configuration Manual

2.9 One-touch Park

NVR Configuration Guide (Advanced) for NRS Expanded Series
Certain models of the speed dome can be configured to automatically start a
predefined park action (e.g., scan, preset, patrol and etc.) after a period of
inactivity (e.g., park time).
Before operating this function, make sure the connected camera supports
the linear scan and is in HIKVISION protocol.
NOTE
1. Select one of the following to access the PTZ settings menu in Live View
mode:
Click the PTZ button in the lower-right corner of the PTZ settings screen.

Press the PTZ button on the front panel.

Click the PTZ Control

2. Click the button to show the general settings of the PTZ control.
Figure 4-12 PTZ Panel – One-Touch
3. There are three selectable one-touch park types. Click the corresponding
button to activate the park action.
Park (Quick Patrol): The dome starts patrol from the predefined Preset 1

to Preset 32, in order, after the park time expires. An undefined preset is
skipped.
Park (Patrol 1): The dome starts move according to the predefined patrol

1 path after the park time.
Park (Preset 1): The dome moves to the predefined Preset 1 location

after the park time.
NOTE
4. Click the button again to inactivate it.
icon in the quick setting bar.
The park time can only be set through the speed dome
configuration interface. By default, the value is 5s.
ISSUE 1.0
4-9