Figure 8-6 Set Arming Schedule For Alarm Input - NEC NRS Expanded Series Configuration Manual

5.
6.
7.
8.
NVR Configuration Guide (Advanced) for NRS Expanded Series

Figure 8-6 Set Arming Schedule for Alarm Input

Choose one day of a week. A maximum of eight time periods can be set for each
day.
Time periods can not be repeated or overlap.
NOTE
Click Apply to save the settings.
Repeat the above steps to set up the arming schedule for other days of the week.
You can also use the Copy button to copy an arming schedule to other days.
Select Linkage Action tab to set up alarm response actions of the alarm input
(refer to Section 6 Setting Alarm Response Actions on page
If necessary, select the PTZ Linking tab and set PTZ alarm input linkage.
Set the PTZ linking parameters and click OK to complete the alarm input settings.
Verify whether the PTZ or speed dome supports PTZ linkage.
NOTE
ISSUE 1.0
8-11).
8-5