Chapter 8 Alarm Settings; Setting Motion Detection Alarm; Figure 8-1 Motion Detection Setup Screen - NEC NRS Expanded Series Configuration Manual

Alarm Settings
S 1 S
ECTION ETTING
You can set an alarm when the camera detects motion.
1.
2.
3.
4.
NVR Configuration Guide (Advanced) for NRS Expanded Series
M D
OTION ETECTION
Access the Motion Detection screen of Camera Management and choose a
camera you want to set up motion detection.
Menu -> Camera -> Motion

Figure 8-1 Motion Detection Setup Screen

Set up detection area and sensitivity.
2a. Check the Enable Motion Detection checkbox. Use the mouse to draw detection
area(s) and drag the sensitivity bar to set sensitivity.
2b. Click button and set alarm response actions.
Click the Trigger Channel tab and select one or more channels to start record/
capture or become full-screen monitoring when a motion alarm is triggered.
Click Apply to save the settings.
Chapter 8
A
LARM
8-1