Figure 11-27 External Port Settings Dialog Box; Figure 11-28 Setting Virtual Server Item - NEC NRS Expanded Series Configuration Manual

NVR Configuration Guide (Advanced) for NRS Expanded Series
4. Click to activate the External Port Settings dialog box. Configure
the External Port number for Server Port, HTTP Port, RTSP Port and
HTTPS Port respectively.
The value of the RTSP port number should be 554 or
between 1024 and 65535, while the value of the other
ports should be between 1 and 65535. The values must
NOTE
be different from each other. If multiple devices are
configured for the UPnP settings under the same router,
the value of the port No. for each device should be
unique.

Figure 11-27 External Port Settings Dialog Box

5. Click OK to save the setting for the current port and return to the
upper-level menu.
6. Click Apply to save the settings.
7. Enter the virtual server setting page of the router. Fill in the blanks for
the Internal Source Port with the internal port value, the External
Source Port with the external port value and other required contents.

Figure 11-28 Setting Virtual Server Item

❍
NOTE
❍
Each item should be corresponding with the device
port, including the server port, HTTP port, RTSP port
and HTTPS port.
The virtual server screen is for reference only. It may
be different due to different router manufactures.
Contact the router manufacturer if you have any
problems with setting the virtual server.
ISSUE 1.0
11-21