Front Panel Operation On Live View; Table 3-2 Front Panel Operation In Live View - NEC NRS Expanded Series Configuration Manual

ISSUE 1.0






When the axillary output is enabled, the main output cannot perform any operation.
You can perform some basic operation on the live view mode for the axillary output.

2.1 Front Panel Operation on Live View

3-2
Auto-switch: the screen automatically switches to the next screen. You must set
the dwell time (the time between switching channels) for each screen on the
configuration menu before enabling the auto-switch.
Menu -> Configuration -> Live View -> Dwell Time
Start Recording: continuous record and motion detection record are supported.
Output Mode: select the output mode to Standard, Bright, Gentle or Vivid.
Add IP Camera: a shortcut to the IP camera management interface.
Playback: playback the recorded videos for the day.
Aux Monitor: the NVR checks the connection of the output interfaces to define the
main and auxiliary output interfaces. The priority level for the main and axillary (Aux)
output is HDMI1/VGA1 > HDMI2/VGA2 (for 2U NVR) and HDMI > VGA (for others).
2U: When the HDMI1, HDMI2, VGA1 and VGA2 are all connected, the HDMI1/
VGA1 is used as the main output and the HDMI2/VGA2 is used as the axillary
output.
Others: When both the HDMI and VGA are connected, the HDMI is used as main
output and the VGA is used as the axillary output.

Table 3-2 Front Panel Operation in Live View

functions that are available on the front panel during Live View.
Table 3-2 Front Panel Operation in Live View
Functions
Common Menu
Menu
Show Single Screen
Show Multi-screen
Manually Switch Screens
Auto-Switch
Playback
Switch between Main and
Aux Output
describes the operation of
Front Panel Operation
Quick access to the sub-menus that you frequently visit. A
maximum of five sub-menu options are supported.
Right click the mouse to access the main menu of the system.
Press the corresponding Alphanumeric button.
For example: Press 2 to display the screen for channel 2 only.
Press the PREV/FOCUS button.
Next screen: right/down direction button.
Previous screen: left/up direction button.
Press Enter button.
Press Play button.
Press Main/Aux button.
Live View