Customizing Patterns; Calling Patterns; Figure 4-8 Ptz Settings - NEC NRS Expanded Series Configuration Manual

ISSUE 1.0

2.5 Customizing Patterns

2.6 Calling Patterns

4-6
3. Select a patrol in the dropdown list and click the Call Patrol button to call it.
4. You can click the Stop Patrol button to stop calling it.
Patterns can be set by recording the movement of the PTZ. You can call the
pattern to make the PTZ movement according to the predefined path.
1. Access the PTZ Control screen:
Menu -> Camera -> PTZ

Figure 4-8 PTZ Settings

2. Choose pattern number in the dropdown list.
3. Click the Start button and click the corresponding buttons in the control
panel to move the PTZ camera. Click the Stop button to stop it.
The movement of the PTZ is recorded as the pattern.
Follow the procedure to move the PTZ camera according to predefined patterns.
1. Select one of the following
Click the PTZ button in the lower-right corner of the PTZ settings screen.

Press the PTZ button on the front panel.

Click the PTZ Control

Select the PTZ option from the right-click menu.

to show the PTZ control panel
icon in the quick setting bar.
:
PTZ Controls