Setting Hdd Property; Figure 13-15 Local Hdd Settings Screen; Figure 13-16 Confirm Hdd Group Settings - NEC NRS Expanded Series Configuration Manual

ISSUE 1.0

4.2 Setting HDD Property

13-8

Figure 13-15 Local HDD Settings Screen

7. Select the Group number for the current HDD.
The default group number for each HDD is 1.
NOTE
8. Click the OK button to confirm the settings.

Figure 13-16 Confirm HDD Group Settings

9. In the popup Attention box, click Yes to finish the settings.
The HDD property can be set to redundancy, read-only or read/write (R/W).
Before setting the HDD property, set the storage mode to Group (refer to section
4.1 Setting HDD Groups on page
An HDD can be set to read-only to prevent important recorded files from being
overwritten when the HDD becomes full in overwrite recording mode.
When the HDD property is set to redundancy, the video can be recorded both onto
the redundancy HDD and the R/W HDD simultaneously so as to ensure high
security and reliability of video data.
13-7).
HDD Management