Playing Back By Event Search; Figure 6-6 Motion Search Screen; Section 5 Configuring Alarm Triggered Recording And Capture - NEC NRS Expanded Series Configuration Manual

1.3 Playing Back by Event Search

NVR Configuration Guide (Advanced) for NRS Expanded Series
NOTE
You can play back recorded files on one or several channels searched out by
event type (e.g., Alarm Input, Motion Detection and VCA).
1. Access the Playback screen:
Menu -> Playback

Figure 6-6 Motion Search Screen

2. Select the Event from the dropdown list on the top-left side.
3. Select Alarm Input, Motion or VCA as the event type.
In
the event type.
NOTE
4. Select the minor type of VCA from the dropdown list.
For configuring the VCA recording, refer to
Configuring Alarm Triggered Recording and Capture on page
NOTE
5. Select the camera(s) for searching and set the Start Time and End Time.
The supported playing speed is 256X.
Figure 6-6 Motion Search Screen
ISSUE 1.0
playback by VCA is used as
Chapter 5, Section 5
5-11.
6-5