Figure 2-23 Successfully Added Ip Cameras; Table 2-1 Explanation Of Icons - NEC NRS Expanded Series Configuration Manual

ISSUE 1.0
2-16
2. You can edit the IP address, Protocol, Management Port and other
information of the IP camera you want to add.
If the IP camera being added has not been activated, you
can activate it from the IP camera list on the Camera
Management screen.
NOTE
3. (Optional) Check the Continue to Add checkbox to add other IP
cameras.
4. Click Add to add the camera.
For IP cameras that were successfully added, the Security status shows the
security level of the camera's password: strong password, weak password
and risk password.

Figure 2-23 Successfully Added IP Cameras

Table 2-1 Explanation of Icons

Icon Description
Edit basic parameters of the
camera.
The camera is disconnected; you
can click the icon to get the
exception information of camera.
Play the live video of the
connected camera.
Icon Description
Add the detected IP camera.
Delete the IP camera.
Advanced camera settings.
Getting Started