Figure 3-8 Live View - Camera Order - NEC NRS Expanded Series Configuration Manual

ISSUE 1.0
2.
3-8
The settings available in this menu include:
Video Output Interface: Designates the output to configure the settings. The 2U

NVR provides VGA/HDMI and VGA2/HDMI2 and others provide the HDMI and VGA
video outputs.
Live View Mode: Designates the display mode to be used for Live View.

Dwell Time: The time in seconds to dwell between switching of channels when

enabling auto-switch in Live View.
Enable Audio Output: Enables/disables audio output for the selected video output.

Volume: Adjust the volume of live view, playback and two-way audio for the

selected output interface.
Event Output: Designates the output to show event video.

Full Screen Monitoring Dwell Time: The time in seconds to show alarm event

screen.
Set the camera order.
Figure 3-8 Live View – Camera Order
a. Select a View mode
window division modes are supported depending on different models.
b. Select the small window and double-click on the channel number to display the
channel on the window.
You can click
all the live view.
c. Click Apply to save the settings.
button to start live view for all the channels or click
including 1/4/6/8/16/25/32/36/64-
to stop
Live View