Configuring Dst Settings; Figure 16-4 Dst Settings Screen - NEC NRS Expanded Series Configuration Manual

3.
4.
S 3 C
ECTION ONFIGURING
To configure the DST settings:
1.
2.
3.
NVR Configuration Guide (Advanced) for NRS Expanded Series
Configure the following settings:
Language: The default language is English.

Output Standard: Select the output standard to NTSC or PAL. This setting must be

the same as the video input standard.
Resolution: For the 2U series NVR, you can configure the VGA/HDMI resolution

and VGA2/HDMI 2 resolution. A maximum of 4K (3840 × 2160) resolution is
selectable for the VGA/HDMI output.
For the other series NVR, you can configure the VGA resolution and HDMI
resolution respectively. A maximum of 4K (3840 × 2160) resolution is selectable for
the HDMI output.
Time Zone: Select the time zone.

Date Format: Select the date format.

System Date: Select the system date.

System Time: Select the system time.

Mouse Pointer Speed: Set the speed of mouse pointer; four levels are

configurable.
Enable Wizard: Enable/disable the Wizard when the device starts up.

Enable Wizard: Enable/disable the Wizard when the device starts up.

Click Apply to save the settings.
DST S
ETTINGS
Access the General settings screen:
Menu > Configuration> General
Select the DST Settings tab.

Figure 16-4 DST Settings Screen

Check the Auto DST Adjustment checkbox.
Or, you can manually check the Enable DST checkbox and select the date for the
DST period.
ISSUE 1.0
16-3