Exporting Network Packet; Figure 11-34 Network Detection Screen; Figure 11-35 Testing Result - Network Delay And Packet Loss - NEC NRS Expanded Series Configuration Manual

4.2 Exporting Network Packet

NVR Configuration Guide (Advanced) for NRS Expanded Series
2. Click the Network Detection tab to display the Network Detection menu.

Figure 11-34 Network Detection Screen

3. Enter the destination address in the Destination Address field.
4. Click the Test to start testing network delay and packet loss. The testing
result displays on the window. If the testing fails, an error message box also
displays.
Figure 11-35 Testing Result – Network Delay and Packet Loss
By connecting the NVR to a network, the captured network data packet can be
exported to USB-flash disk, SATA/eSATA, DVD-R/W and other local backup
devices.
1. Access the Network Traffic screen:
Menu -> Maintenance -> Net Detect
2. Click the Network Detection tab to display the Network Detection screen.
3. Select the backup device from the Device Name dropdown list.
Click Refresh if the connected local backup device cannot be
displayed. When it fails to detect the backup device, verify whether
it is compatible with NVR. You can format the backup device if the
NOTE
format is incorrect.
ISSUE 1.0
11-25