Configuring Redundant Recording And Capture; Figure 5-24 Hdd General; Figure 5-25 Hdd General - Editing - NEC NRS Expanded Series Configuration Manual

ISSUE 1.0
S 8 C
ECTION ONFIGURING
Enabling redundant recording and capture, means saving the record files and
captured pictures not only in the R/W HDD but also in the redundant HDD, will
effectively enhance the data safety and reliability.
1.
2.
5-16
R
EDUNDANT
Access the HDD Information screen:
Menu -> HDD

Figure 5-24 HDD General

Select HDD and click
Figure 5-25 HDD General – Editing
2a. From HDD Property, select Redundancy.
2b. Click Apply to save the settings.
2c. Click OK to return to the upper level menu.
The Storage mode in the HDD advanced settings must be set to Group
before setting the HDD property to Redundant. For detailed
information, refer to
NOTE
should be at least one other HDD that is in Read/Write status.
R
ECORDING AND
to access the local HDD settings screen.
Chapter 13, 4.2 Setting HDD
C
APTURE
Property. There
Recording and Capture Settings