Configuring Ddns; Figure 11-4 Ipserver Settings Screen - NEC NRS Expanded Series Configuration Manual

ISSUE 1.0

2.3 Configuring DDNS

11-4
6. Enter the Verification Code of the device.
The verification code consists of six capital letters and is located at
the bottom of the DVR. You can also use the scanning tool on your
phone to quickly get the code by scanning the QR code.
NOTE
7. Click Apply to save and exit the screen.
After configuration, you can access and manage the NVR using your mobile
phone where the Cloud P2P application is installed.
If your NVR is set to use PPPoE as its default network connection, you can set
Dynamic DNS (DDNS) to be used for network access.
Prior registration with your ISP is required before configuring the system to use
DDNS.
1. Access the Network settings screen:
Menu -> Configuration -> Network
2. Select the DDNS tab to open the DDNS settings screen.
3. Check the DDNS checkbox to enable this feature.
4. Select DDNS Type. Five different DDNS types are selectable: IPServer,
DynDNS, PeanutHull, NO-IP and SIMPLEDDNS.
IPServer:

Enter the Server Address for IPServer.

Figure 11-4 IPServer Settings Screen

Network Settings