Configuring Email; Figure 11-20 Network Settings Screen - NEC NRS Expanded Series Configuration Manual

ISSUE 1.0

2.8 Configuring Email

11-16
The system can be configured to send an Email notification to all designated
users if an alarm event is detected, an alarm or motion event is detected or the
administrator password is changed.
Before configuring the Email settings, the NVR must be connected to a local area
network (LAN) that maintains an SMTP mail server. The network must also be
connected to either an Intranet or the Internet depending on the location of the
Email accounts where you want to send notification.
1. Access the Network settings screen:
Menu -> Configuration -> Network

Figure 11-20 Network Settings Screen

2. Set the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway and the
Preferred DNS Server in the Network Settings menu.
3. Click Apply to save the settings.
4. Select the Email tab to enter the Email settings.
Network Settings